Crs-280 Connector Overview; Figure 3-1. Crs-280 Connectors - Comtech EF Data CRS-280L Installation And Operation Manual

3.1.1

CRS-280 Connector Overview

The front and rear panels of the CRS-280 IF Switch are shown in Figure 3-1.
The front panel connectors provide all necessary connections to connect all equipment internal
and external to the 1:N redundancy setup. The rear panel connector of the CRS-280 provides the
control connector between the CRS-280 and its companion redundancy switch (e.g., CRS-300,
CRS-500, etc.).
Connector Pinouts
Front Panel View
Rear Panel View

Figure 3-1. CRS-280 Connectors

3–2
CRS-280/280L IF Switch for 1:N Redundancy
Revision -
MN-CRS-280/280L