Introduction; Maintenance Hints; Preventive Maintenance - Henny Penny EEG-242 Technical Manual

6-1. INTRODUCTION

6-2. MAINTENANCE
HINTS
6-3. PREVENTIVE
MAINTENANCE
Aug. 2014
SECTION 6. MAINTENANCE
This section provides checkout and replacement procedures,
for various parts of the fryer. Before replacing any parts, refer
to the Troubleshooting Section to aid you in finding the cause
of the malfunction.
1. A multimeter will help you to check the electric
components.
2. When the manual refers to the circuit being closed, the
multimeter should read zero unless otherwise noted.
3. When the manual refers to the circuit being open, the
multimeter should read infinity.
Do not move the fryer with hot oil in the vat or filter pan.
Severe burns can result from splashing hot oil.
To ensure a long life of the fryers and their components, regular
maintenance should be performed. Refer to the chart below.
Frequency
Daily
Daily
Every filter pad change
Quarterly
When oil smokes, foams-up
violently, or tastes bad
Every change of oil
Semi-Annually
38
Model EEG-241, 242, 243, 244
Action
Filter the oil (See Daily
Filtering Instructions Section in
Operator's Manual)
Change Filter Pad (See
Changing Filter Pad Section in
Operator's Manual)
Lubricate filter pan o-rings
Inspect/Change Filter Pan
O-Rings (See Check/Replace
Filter Drain Pan O-Ring
Section)
Change oil
Clean Vat (See Clean-Out Mode
Section in Operator's Manual)
Clean blowers & Vents (See
Section 3-21 in Operator's
Manual)