Section 2. Info & Filter Button Stats; Info Button Stats; Filter Button Stats - Henny Penny EEG-242 Technical Manual

2-1. INFO BUTTON STATS

2-2. FILTER BUTTON STATS

Aug. 2014
SECTION 2. INFO & FILTER BUTTON STATS
Actual Oil Temperature
1. Press
display, for each vat.
Set-point Temperature
1. Press
the set-point (preset) temperature of each vat.
Recovery Information for each Vat
1. Press
the recovery time that oil temperature went from 250°F
(121°C) to 300°F (149°C) shows in the right display. For
example,
30 seconds for the oil temperature to recover to 300°F
(149°C) from 250°F (121°C).
Cook Cycles Remaining before Filtering
1. Press and release either
shows "COOKSREMAINING" and the right display shows
the number of cook cycles before the next auto filter. For
example.
means after 3 more cook cycles on the left vat, the controls
asks the operator if they are ready to filter or not. But, 6
more cook cycles remain on the right vat.
Time and Date
2. Press either
diplays, along with the time-of-day and date of the last
filter.
Filter Pad Hours
3. Press either
shows in the diplays.
and the actual oil temperature shows in the
twice and SP shows in the display, along with
3 times and REC shows in the left display and
REC 5:30
If no buttons are pressed within 5 seconds in
any of stats modes, the controls revert back to
normal operation.
REMA INING
twice and 'FILTERED" shows in the
three times and 'FLTR PAD XX HRS"
10
Model EEG-241, 242, 243, 244
means it took 5 minutes and
button and the left display
3 6