Henny Penny EEG-242 Technical Manual page 30

Model EEG-241, 242, 243, 244
5-1. SPECIAL PROGRAM Program Code Change (SP-25) (Continued)
MODE (Continued) If satisfied with code, press and "*CODE CHANGED*"
shows in display.
If not satisfied with code, press and "*CANCEL" shows
in display, then reverts back to "SP-25" and "CHANGE, MGR
CODE? 1=YES". Now the above steps can be repeated.
Usage Code Change (SP-26)
This allows the operator to change the reset usage code (factory
set at 1, 2, 3) to reset the usage amounts of each product. See
Review Usage step in Information Mode.
Press ► button and "SP-26 CHANGE USAGE CODE?
1=YES" flashes in the display. Press and "ENTER NEW
CODE, P=DONE, I=QUIT show scrolls through the display.
Press the product buttons for new code.
If satisfied with code, press and "REPEAT NEW CODE,
P=DONE, I=QUIT, shows in display. Press same code buttons.
If satisfied with code, press "*CODE CHANGED*" shows
in display.
If not satisfied with code, press and "*CANCEL" shows in
display, then reverts back to "SP-26" and "CHANGE,
USAGE CODE? 1=YES". Now the above steps can be repeat-
ed.
Dispose Requires Code ? (SP-27)
Press ► button and "SP-27 DISPOSE REQUIRES CODE ?"
flashes in the left display. Press the ▲ or ▼ buttons to choose
YES or NO. If set to YES, code 1, 2, 3 must be entered to dis-
card the oil from the vat, using the Dispose Mode.
Longer Fill Time (SP-28)
Press ► button and "SP-28 LONGER FILLTIME EN-
ABLED?" flashes in the left display. Press the ▲ or ▼ buttons
to choose YES or NO.
Let User Exit Fill (SP-29)
Press ► button and "SP-29 LET USER EXIT FILL" flashes
in the left display. Press the ▲ or ▼ buttons to choose YES or
NO. If YES is chosen, the user can exit the Express Filter
TM
fill operation.
Aug. 2014 28