Communication Connectors And Terminals; Pu Connector - Mitsubishi Electric FR-CS84-012 Instruction Manual

2.7

Communication connectors and terminals

2.7.1

PU connector

 Mounting the operation panel or the parameter unit on the enclosure
surface
• Having an operation panel or a parameter unit on the enclosure surface is convenient. With a connection cable, the
operation panel or the parameter unit can be mounted to the enclosure surface and connected to the inverter.
Use the option FR-CB2[ ], or connectors and cables available on the market.
(To mount the optional LCD operation panel (FR-LU08), the optional connector (FR-ADP) is required.)
Securely insert one end of the connection cable until the stoppers are fixed.
Parameter unit (FR-PU07)
(option)
NOTE
• Refer to the following table when fabricating the cable on the user side. Keep the total cable length within 20 m.
• Commercially available products (as of February 2015)
Product
Communication
cable
RJ-45 connector
 Communication operation
• Using the PU connector as a computer network port enables communication operation from a personal computer, etc.
When the PU connector is connected with a personal, FA or other computer by a communication cable, a user program
can run to monitor the inverter or read and write parameters.
Communication can be performed with the Mitsubishi inverter protocol (computer link operation).
For the details, refer to page
Parameter unit connection cable
(FR-CB2[])(option)
Enclosure surface operation
(option)
panel (FR-PA07)
Operation panel connection
connector (FR-ADP)
(option)
LCD operation panel
(FR-LU08)(option)
Model
SGLPEV-T (Cat5e/300 m)
24AWG × 4P
5-554720-3
163.
PU connector
Manufacturer
Mitsubishi Cable Industries, Ltd.
Tyco Electronics
2.7 Communication connectors and terminals
2. INSTALLATION AND WIRING
1
2
3
5
5
6
7
8
9
10
41