Connecting Cables For Room Computers, Guest Laptops And Other Input Sources; Using Recommended Cables - Smart Technologies SBID-MX265 Installation And Maintenance Manual

Smart board mx series
Hide thumbs Also See for SBID-MX265:
Table of Contents

Advertisement

CHAPTER 3
CONNECTING POWER AND DEVICES
Connecting cables for room computers,
guest laptops and other input sources
You can connect cables to the display so that users can connect and use room computers, guest
laptops or other devices, such as Blu-ray™ disc players.
NOTE
For information about configuring connected computers, see Chapter 5: Configuring connected
computers on page 49.

Using recommended cables

SMART recommends the following varieties of cable:
Cable type
Maximum length
HDMI
23' (7 m)
VGA
23' (7 m)
Stereo 3.5 mm
20' (6 m)
USB
16' (5 m)
Using cables that exceed these maximum lengths may produce unexpected results, such as
degraded picture quality or degraded USB connectivity.
1
The performance of cables longer than 23' (7 m) is highly dependent on the cable's quality.
23
smarttech.com/kb/171257
Recommendation
1
Use only certified HDMI cables that have been
tested to support the performance standard you
require.
Use VGA cables with all pins in their connectors fully
populated and wired.
See
VGA cables and connectors
information.
[N/A]
Use a USB extender if the distance between the
computer and the display is greater than 16' (5 m).
For more information, see USB extenders on page 8.
for more

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sbid-mx286Sbid-mx275

Table of Contents