Setting Connected Computers' Resolutions And Refresh Rates - Smart Technologies SBID-MX265 Installation And Maintenance Manual

CHAPTER 5
CONFIGURING CONNECTED COMPUTERS
Installing SMART Product Drivers
SMART Board MX series interactive displays require SMART Product Drivers 12.10 or later installed
on the room computer. If you've installed SMART Learning Suite 17.1 or earlier, you'll need
download a newer version of SMART Product Drivers from smarttech.com/downloads.
Setting connected computers' resolutions and
refresh rates
The following table presents the recommend resolutions and refresh rates for the display's input
sources:
Input source
HDMI 1 and HDMI 2
HDMI 3 (with
VGA
If possible, set connected computers to these resolutions and refresh rates. See the connected
computers' operating system documentation for instructions.
For more information, see Appendix E: Supported resolutions on page 95.
50 smarttech.com/kb/171257
Resolution
3840 × 2160
1920 × 1080
1920 × 1080
Refresh rate
60 Hz
60 Hz
60 Hz