1
OUTLINE
1.1
Part Names
Front panel
Connector type
[5]
[1]
[4]
[3]
[2]
[1]
[10]
[9]
No.
Name
[1]
Expansion adapter connecting
hooks
[2]
Built-in RS-485 communication
terminal block
[3]
Built-in Ethernet communication
connector
[4]
Operation status display LED
PWR LED
ERR LED
P.RUN LED
BAT LED
CARD LED
SD/RD LED
RD LED
SD LED
[5]
Input connector
[6]
Extension module connecting hook
[7]
I/O display LED
Spring clamp terminal block type
[11]
[6]
[7]
[8]
[6]
[14]
Description
When connecting an expansion adapter, secure it with these hooks.
Terminal block for connection with RS-485-compatible devices
Connector for connection with Ethernet-compatible devices (with cap)
For details, refer to MELSEC iQ-F FX5 User's Manual (Ethernet Communication).
Indicates whether the CPU module is powered or not.
Lit: Powered
Off: Not powered or hardware error (Page 141 Checking with LEDs)
Indicates the error status of the CPU module. (Page 141 Checking with LEDs)
Lit: Error or hardware error
Flashing: Factory default setting, error, hardware error, or resetting
Off: Operating normally
Indicates the program running status.
Lit: Operating normally
Flashing: Paused
Off: Stopped or stop error
Indicates the battery status.
Flashing: Battery error
Off: Operating normally (Page 141 Checking with LEDs)
Indicates whether an SD memory card can be used or not.
Lit: Can be used or cannot be removed.
Flashing: In preparation
Off: Not inserted or can be removed.
Lit when the CPU module is sending or receiving data through built-in Ethernet communication.
Lit when the CPU module is receiving data through built-in RS-485 communication.
Lit when the CPU module is sending data through built-in RS-485 communication.
Connector for connecting input signal cables.
For details on the terminal layout, refer to Page 39 Terminal Layout.
When connecting an expansion module, secure it with these hooks.
Lit when the input or output is on.
When the front covers are open
[17]
[16]
[12]
[15]
[13]
1
1 OUTLINE
27
1.1 Part Names