6.7
Examples of Wiring for Various Uses
Notes about examples of wiring
The examples of wiring are given under the following conditions.
■Input/output number
The input/output numbers are the actual numbers on the program (They may differ from the numbers shown on the product
terminals).
■Input/output specifications of products
Check the input/output specifications of products and examples of wiring.
• There are products for sink output and for source output.
■Examples of program
The examples of programming (instructions) are given based on the allocation of the input/output numbers for wiring.
For the instructions, refer to MELSEC iQ-F FX5 Programming Manual (Instructions, Standard Functions/Function Blocks).
Positioning function
6
For wiring examples for the positioning function, refer to MELSEC iQ-F FX5 User's Manual (Positioning Control - CPU
module built-in, High-speed pulse input/output module).
Communication function
For wiring of the built-in RS-485 communication terminal blocks and communication adapters, refer to the following.
MELSEC iQ-F FX5 User's Manual (Serial Communication)
MELSEC iQ-F FX5 User's Manual (MODBUS Communication)
For wiring of the built-in Ethernet, refer to the following.
MELSEC iQ-F FX5 User's Manual (Ethernet Communication)
High-speed counter
Examples of wiring for high-speed counters are shown below.
When capturing pulses of a response frequency of 50 to 200 kHz, refer to Page 102 When a high-speed pulse is
captured.
For details of the high-speed counters, refer to MELSEC iQ-F FX5 User's Manual (Application).
For the programs, refer to MELSEC iQ-F FX5 Programming Manual (Instructions, Standard Functions/Function Blocks).
6 WIRING
123
6.7 Examples of Wiring for Various Uses