Appendix 10Added And Changed Functions - Mitsubishi Electric FX5UC-96MT/D User Manual

Appendix 10
The functions added or changed with the CPU module and engineering tool, and the supported CPU modules' firmware
version and engineering tool software version are given below.
• The firmware version can be confirmed with module diagnostics (CPU diagnostics). Refer to Page 143 Module
diagnostics (CPU diagnostics) for details on the module diagnostics (CPU diagnostics).
• Refer to the GX Works3 Operating Manual for details on the software version.
Add/Change Function
High speed input/output module is supported.
FX5-CCLIEF is supported.
Event history is supported.
FX5-80SSC-S is supported.
The following modules are supported.
• FX5-4AD-TC-ADP
• FX5-4AD-PT-ADP
The following modules are supported.
• FX5-8AD
• FX5-4LC
• FX5-20PG-P
• FX5-CCL-MS
• FX5-ASL-M
The following modules are supported.
• FX5-4AD
• FX5-4DA
*1 Saving the event history file to the SD card is supported from CPU module serial No. 16Y**** and later.
APPX
194
Appendix 10 Added and Changed Functions
Added and Changed Functions
Supported CPU module
firmware version
"1.030" and above
"1.030" and above
*1
"1.040" and above
"1.014" and above
"1.040" and above
"1.050" and above
"1.050" and above
Supported engineering Reference
tool software version
"1.025B" and above Page 47
"1.025B" and above Page 48
"1.030G" and above Page 144
"1.030G" and above Page 47
"1.030G" and above Page 50
"1.030M" and above Page 47
"1.040S" and above Page 47