Rules Of System Configuration And Examples Of Reconfiguration; System Configuration Example - Mitsubishi Electric FX5UC-96MT/D User Manual

4.5
Rules of System Configuration and Examples of
Reconfiguration
The rules of system configuration are explained below referring to a sample system configuration using expansion adapter, I/
O module, and intelligent function module.

System configuration example

The following system configuration is under consideration.
Check of limitation on the number of modules
Check if the sample system configuration is within the connectable-module range.
■Number of connected expansion adapters
(Page 55 Number of connected expansion adapters)
Type
Expansion adapter (Communication)
■Number of connected extension modules
• Number of modules connected on whole system
(Page 55 Overall system limitation)
Type
Extension module
Connector conversion module
Bus conversion module
• Number of modules connected to the CPU module
(Page 56 Connection to the CPU module)
Type
Total No. of I/O modules, intelligent function modules, and bus conversion modules
Total No. of intelligent function module and bus conversion modules
• Number of modules connected to the bus conversion module
(Page 57 Connection to the bus conversion module (connection with FX3 extension devices))
Type
Total No. of intelligent function modules
4 SYSTEM CONFIGURATION
66

4.5 Rules of System Configuration and Examples of Reconfiguration

The number of transmission points
setting for AnyWireASLINK
64 points
Remote I/O Remote I/O
station station
No. of modules used Limitations
2
No. of modules used Limitations
11
(Connector conversion
module is excluded.)
1
1
No. of modules used Limitations
5
CC-Link
Remote I/O
station
Up to 2
Up to 16
(Extension power supply modules, connector
conversion module are excluded.)
Only 1
Only 1
No. of modules used Limitations
11 Up to 12
7 Up to 8
Up to 6
To CC-Link
master station
Judgment
OK
Judgment
OK
OK
OK
Judgment
OK
OK
Judgment
OK