Setting The Clock - Rinnai RHFE-308 FTR Installation And User Manual

When the appliance is first plugged in and then turned on, the Digital Display will show
TIMER/TEMP ADJUSTMENT
OPEN THE CONTROL PANEL - SEE PAGE 10.
1
When the appliance is first plugged in or after a
power failure, the Digital Display will show
Press the Set Times button once, the Clock Indicator
will flash.
2
Press and hold the "
begin to change first, then the time will change by
whole hours. Release the button when AM 10:00
shows on the Digital Display. Confirm that you have
selected AM, a small indicator on the left hand side of
the Digital Display indicates the AM setting.
Press and hold the "
button when AM 10:35 shows. If you go past AM
10:35, then the "
the time settings in reverse.
3
Press the Timer Set button five times to lock in and
complete setting the time. The Clock and Timer
indicators will go out. A small indicator on the Digital
Display will flash to show that the clock is operating.

SETTING THE CLOCK

As an example, let's set the clock to 10:35 am.
DIGITAL DISPLAY
" button; the minutes will
" button again, release the
" button can be used to change
TIMER/CLOCK SET INDICATOR
ON-OFF SWITCH INDICATOR
ON-OFF SWITCH
TIMER/CLOCK SET
AM
. PM
Set ・ Room
AM
PM
Set ・ Room
AM
PM
Set ・ Room
AM
PM
Set ・ Room
– 14 –
.
Clock
Timer 1
on
Timer 2
Temp
・
Set times
Time
Clock
Timer 1
on
Timer 2
Temp
・ Set times
Time
Clock
Timer 1
on
Timer 2
Temp
・ Set times
Time
Clock
Timer 1
on
Timer 2
Temp
・
Set times
Time
off
off
off
off