Room Temperature Adjustment; Economy Mode - Rinnai RHFE-308 FTR Installation And User Manual

Energysaver space heater
Table of Contents

Advertisement

I ROOM TEMPERATURE ADJUSTMENT
The room temperature and pre-set temperatures can only be displayed and adjusted when the heater is
running.
1
Press the "
" button to increase the temperature
setting or "
" button to decrease the temperature
setting.
The Temperatures can be preset to:
a) [ L ] low (about 10˚C)
b) [16˚C] to [26˚C] in 1˚C steps
c) [ H ] (continuously high)
If the heater does not ignite then the pre-set temperature may not be set to a setting which is higher
than the room temperature. The ON indicator will change colour from red to green when the heater
reaches the pre-set temperature and stops runnning.
I ECONOMY MODE
The Economy mode may only be operated when the heater is turned on, but remains in the system
memory once set until deactivated.
Select the Economy mode before selecting time operation.
1
Press the Economy button to start the Economy
function. The Economy indicator will glow.
2
Press the Economy button once more to switch off
the function.
After the room is heated initially the air temperature
may be dropped to a lower level without affecting
comfort. 30 mins after the selected room temperature
(set with the thermostat) is reached, the Economy
mode, if set, reduces the temperature by 1˚C. After
another 30 mins it reduces the temperature by a
further 1˚C, this is an energy saving feature. The
Economy mode does not operate if the heater is
under capacity for the room size.
AM
PM
Child Lock
Child Lock
– 11 –
Set ・ Room
Temp
Time
Economy
Timer 1
Economy
Timer 1
1°reduction
1°reduction
30 min
30 min

Advertisement

Table of Contents
loading

Table of Contents