Fitting Unit - Rinnai RHFE-308 FTR Installation And User Manual

AIR INLET HOSE
a
Attach the Air Inlet Hose to the flue manifold
on either inlet position a or b. The unused
inlet is plugged with the rubber cap supplied
on the manifold.
EXHAUST PIPE & LOCKING CLAMP
The following components can be fitted by reaching
down the rear of the appliance as it is positioned
against the wall.
1.
Manifold
Connect the flue elbow to the manifold by
moving the appliance into position.

FITTING UNIT

b
– 31 –
2.
Locking clamp
Elbow
Manifold
Fit the locking clamp over the connection
between the flue elbow and the manifold.
Engage the hook and rotate it until it snaps
against the body of the clamp.
3.
Manifold
4.
Fit Clip
Slide the insulation sock up to the flue
manifold and slip the securing clip over the
sock as shown.
Hook
Locking Clamp
Locking clamp
Elbow
Slide
Sock