Toshiba e-Studio2505AC Hardware Troubleshooting Manual page 47
E-studio5005ac series;
e-studio5008a series.
multifunctional digital colog system /
multifunctional digital systems.
Hide thumbs
Also See for e-Studio2505AC:
- Printing manual (174 pages) ,
- Software installation manual (164 pages) ,
- Copying manual (132 pages)
Table of Contents
Advertisement
1.TROUBLESHOOTING FOR THE HARDWARE
8
Remove the misfed paper.
If the paper is caught by the roller in the exit section, remove it by lifting the roller up with your fingers.
Close the cover of the Bridge Unit.
9
10
Close the upper receiving tray of the finisher.
Place your hands on the near and far side of the lever and push to close the tray until it clicks.
Be careful not to let your fingers be caught between the finisher body and the upper tray of the finisher.
This could injure you.
The upper receiving tray of the finisher can also be closed by pressing the right side of the lever.
Clearing a Paper Misfeed 47
Hide quick links:
Advertisement
Table of Contents
