Ricoh AP305 Operating Instructions Manual page 93

Message
Reset PCU Correctly
Reset Toner Correctly
Reset Tray Correctly
Reset Waste Toner
Toner is Low: XXX
WarmUp
Waste Toner is Full
Waste Toner Nearly Full
Description
The photoconductor unit is
not installed in the printer.
The toner cartridge is not
installed correctly.
The paper tray is not in-
stalled correctly.
The tray on the paper feed-
ing path is not set correctly
when the printer receives
the print job.
The waste toner bottle is
not installed correctly.
The indicated toner is low
or has run out.
The printer is preparing for
printing.
The waste toner bottle is
full.
The waste toner bottle is
nearly full.
Error & Status Messages
Comments
Install the photoconductor
unit correctly. P.88 "Re-
placing the Photoconductor
Unit"
Install the cartridge cor-
rectly. P.85 "Replacing
the Toner Cartridge"
Install the paper tray cor-
rectly.
Install the paper tray cor-
rectly. The printer will re-
start printing automatical-
ly.
Install the waste toner bot-
tle correctly. P.92 "Re-
placing the Waste Toner
Bottle and Charger"
Replace the toner cartridge.
P.85 "Replacing the Toner
Cartridge"
Wait until the printer is
warmed up.
Replace the waste toner
bottle. P.92 "Replacing
the Waste Toner Bottle and
Charger"
Replace the waste toner
bottle. P.92 "Replacing
the Waste Toner Bottle and
Charger"
6
63