Ricoh AP305 Operating Instructions Manual page 87

Message
Paper Size Error
Power Off/On
SC:xxx
Remove Misfeed
From Output Tray
Remove Misfeed
From Tray #
Reset Charger
Correctly
Reset Fusing
Unit Correctly
Reset PCU
Correctly
Reset Toner
Correctly
Reset Tray
Correctly
Reset Waste T
Bottle Correctly
Description
There is a difference be-
tween the paper size in the
tray and the requested pa-
per size from the computer.
There is a malfunction in
the printer.
There is a paper misfeed in
the printer.
There is a paper misfeed in
the printer.
The charger is not set cor-
rectly or the charger clean-
er is not in the correct
position.
The fusing unit is not in-
stalled in the printer.
The photoconductor unit is
not installed in the printer.
The toner cartridge is not
installed correctly.
The paper tray is not in-
stalled correctly.
The tray on the paper feed-
ing path was not set cor-
rectly when the printer
received the print job.
The waste toner bottle is
not installed.
Error & Status Messages
Comments
After confirming that the
size, feed direction of paper
and the paper size dial in
the tray are set correctly,
open and close the front
cover. P.49 "Loading Pa-
per in the Paper Tray"
Turn the printer off and on.
If this doesn't clear the
problem, contact your sales
or service representative.
Remove the misfed paper.
P.76 "Removing Misfed
Paper"
Remove the misfed paper.
P.76 "Removing Misfed
Paper"
Set the charger correctly.
P.92 "Replacing the Waste
Toner Bottle and Charger"
Contact your sales or ser-
vice representative.
Install the photoconductor
unit. P.88 "Replacing the
Photoconductor Unit"
Install the cartridge cor-
rectly. P.85 "Replacing
the Toner Cartridge"
Install the paper tray cor-
rectly.
Install the paper tray cor-
rectly. The printer will re-
start printing automatical-
ly.
Install the waste toner bot-
tle. P.92 "Replacing the
Waste Toner Bottle and
Charger"
6
57