Ricoh AP305 Operating Instructions Manual page 92

Troubleshooting
Message
Change PCU
Close Front Cover
Close Left Cover
Close Paper Exit Cover
Energy Save Mode
Error: Power Off/On
Fuser Oil is Low
Load Paper
6
Misfeed: Front Cover
Misfeed: Output Tray
Misfeed: Paper Tray
Paper Size Error
Please Wait
Reset Fusing Unit
62
Description
The photoconductor unit is
nearly at the end of its life.
The front cover is open.
The left cover is open.
The paper exit cover is
open.
The printer is in Energy
Saver mode.
There is malfunction in the
printer.
Fuser oil is low. You can
print about 200 pages more
after this message appears.
There is no paper of the in-
dicated paper size in the
paper tray being used.
There is a paper misfeed in
the printer.
There is a paper misfed in
the printer.
There is a paper misfed in
the printer.
There is a difference be-
tween the paper size in the
tray and the requested pa-
per size from the computer.
The printer is now prepar-
ing for printing.
The fusing unit is not in-
stalled in the printer.
Comments
If printed side gets dirty,
replace the photoconduc-
tor unit. P.88 "Replacing
the Photoconductor Unit"
Close the front cover. (
P.1)
Close the left cover. (
Close the paper exit cover.
( P.3)
Wait for a while.
Turn the printer off and on.
Replace the fuser oil bottle.
P.90 "Replacing the Fuser
Oil Bottle and Ozone Filter"
Load paper of the indicated
paper size into the paper
tray being used.
Remove the misfed paper.
P.76 "Removing Misfed
Paper"
Remove the misfeed paper.
P.76 "Removing Misfed
Paper"
Remove the misfeed paper.
P.76 "Removing Misfed
Paper"
After confirming that the
size, feed direction of paper
and the paper size dial in
the tray are set correctly,
open and close the front
cover. P.49 "Loading Pa-
per in the Paper Tray"
Wait for a while.
Contact your sales or ser-
vice representative.
P.1)