Configuring the Printer for the Network with the Operation Panel
Note
It is recommended that you do
not select protocols that are not
used on your network.
Limitation
If you want to select EtherTalk,
you should install the optional
RICOH-SCRIPT2 Type305.
A Press { { { { U U U U } } } } { { { { T T T T } } } } until the follow-
ing message appears.
3
<System Menu>
39.Active PTL. l
B Press { { { { Enter} } } } .
The current setting appears on
the panel display.
<Active PTL.>
*All Active
C Press { { { { U U U U } } } } { { { { T T T T } } } } until the proto-
col you want to use appears.
D Press { { { { Enter} } } } .
E
If you use TCP/IP, you should as-
sign the IP address to your print-
er.
Note
To get the IP address for your
printer, contact your network
administrator.
If you use TCP/IP, you should
assign the IP address to your
printer.
24
A Press { { { { U U U U } } } } { { { { T T T T } } } } until the follow-
ing message appears.
<System Menu>
32.IP Address
B Press { { { { Enter} } } } .
The current IP address appears
on the panel display.
011.022.033.044
j
j
C Use { { { { U U U U } } } } { { { { T T T T } } } } to specify the left-
most digit of the IP address.
111.022.033.044
j
D Press { { { { Enter} } } } .
j
The pointer (U) moves to the
l
next digit as shown.
111.022.033.044
Note
You can return the pointer
(U) to the previous (left) digit
by pressing {Escape}.
If you press {Escape} when
the pointer (U) is on the left-
most position, the specified
IP address is reset.
E Use { { { { U U U U } } } } { { { { T T T T } } } } to specify the sec-
ond digit of the IP address.
191.022.033.044
F Press { { { { Enter} } } } .
jl/#
jl/#
j
jl/#
j
jl/#
j
l