Ricoh AP305 Operating Instructions Manual page 88

Troubleshooting
Message
Warming Up
Waste T Full
(on the lower line)
Waste Toner is
Full
A3:Error
6
A6:Error
AB:Error
58
Description
The printer is preparing for
printing.
The printer adjusts itself
regularly to maintain print
quality. (This message
might appear while print-
ing.)
The waste toner bottle is
nearly full.
The waste toner bottle is
full.
Ther is too much data for
the I/O buffer to handle.
There is not enough printer
memory to print one or
more of the pages in the
print job.
The printer is unable to
process the data you are
trying to print.
Comments
Wait until the printer is
warmed up.
It is not an error message.
The printer is working
properly. Just wait a while.
Replace the waste toner
bottle. P.92 "Replacing
the Waste Toner Bottle and
Charger"
Replace the waste toner
bottle. P.92 "Replacing
the Waste Toner Bottle and
Charger"
Check if the interface cable
is inserted into the printer
and your computer secure-
ly.
Check if the interface cable
is not damaged or broken.
Increase the size of I/O
buffer. P.103 "System
Menu"
See P.114 "Low Memory".
Install an optional memory
units (SIMM) to increase
printer memory capacity.
Reduce the amount of data
being sent to the printer.