Table of Contents
Advertisement
Making Printer Settings with the Operation Panel
10. Bi-direction
You can specify the printer response mode for status fetch requests when the
standard parallel interface is being used. Use the "Standard" setting when you
are experiencing problems while the printer is connected to another manufac-
turer's print box.
• Original Mode
• Standard
Note
This setting is effective only for "Parallel 1".
11. OHP Slip
The OHP Slip is a sheet of paper placed between printed OHP transparencies.
You can set this option off and on. For more information, see
transparencies".
• On
• Off
12. PrinterLang.
You can specify the printer language that is automatically set when the print-
er is turned on.
• IPDL-C
• Option (RPS)
7
13. Language
You can specify the language of the text that appears on the panel display.
• English
• French
• German
• Italian
• Dutch
• Japanese
32. IP Address – 39. Active PTL.
These items appear when an optional network interface board is installed in
the printer.
Reference
P.23 "Configuring the Printer for the Network with the Operation Panel"
106
P.47 "OHP
Advertisement
Table of Contents
