Polling Transmission Clear Report - Ricoh Aficio 340 System Settings

ADVANCED TRANSMISSION FEATURES
B Enter the 4 character Polling ID
with letter keys/ number keys
and the letter (A–F).
Note
If you make a mistake, press
the { { { { Clear/Stop} } } } key and try
again.
0000 and FFFF is not available.
C Press [S S S S File] and specify
4
whether to save the stored orig-
inal.
Each time you press the key, the
text at the middle right corner of
the display toggles between
"Save" and "Use once".
Note
To delete the original imme-
diately after transmission, se-
lect "Use once". To repeated-
ly send the original, select
"Save".
E
Press [OK].
The Transmission Mode menu is
shown. A check mark is added to
"Polling TX".
Note
To cancel the Polling Transmis-
sion, press [Cancel]. The Trans-
mission Mode menu is shown.
92
F
Press [Exit].
The initial display is shown.
Note
"Polling TX" is displayed.
you set up other advanced
transmission function (except
Polling Reception), "Others" is
displayed.
G
Press the { { { { Start} } } } key.
ND1X02E7
Polling Transmission Clear
Report
This report allows you to verify
whether Polling Transmission has
taken place.
Limitation
This report is not printed if the
User Parameters are set to allow
the stored originals to be repeated-
ly sent (Save).
the User Parameters"
Note
This report is turned on by default.
You can turn it off if you wish.
P.203 "Changing the User Parame-
ters"
By default, a portion of the sent im-
age is printed on the report. You
ND1X03E0
If
P.203 "Changing