Ricoh Aficio 340 System Settings page 301

Tone
This feature allows a machine con-
nected to a pulse dialing line to send
tonal signals (for example if you want
to use a special service on a tone dial-
ing line). When you press the { { { { Tone} } } }
key, the machine dials the number us-
ing tonal signals.
Limitation
You cannot place a tone before the
first digit of a fax number.
Some services may not be available
when using the { { { { Tone} } } } key.
Note
A tone is shown as a " • " on the
display.
- - Sending Tonal Signals by ISDN
- -
(ISDN Option Required)
You can still send tone signals to a G3
user even if the machine is only con-
nected to an ISDN line.
Note
This feature can only be used for
Memory or Immediate Transmis-
sion. You cannot dial through
ISDN using On-hook Dial or Man-
ual Dial.
Subaddress (ISDN option required)
ISDN allows two or more terminals
(such as a facsimile and digital tele-
phone) to be connected to a single
line. These terminals are identified by
their subaddress numbers. If the ter-
minals connected to the line at a des-
tination are assigned subaddresses,
dialing a subaddress allows you to di-
rect your fax message to a particular
terminal at the destination.
Limitation
Subaddress can only be used with
ISDN.
Note
You need to program a User Func-
tion key with the subaddress func-
tion. P.164 "ASSIGNING USER
FUNCTION KEYS"
You can program a subaddress
number in a Quick Dial or Speed
Dial.
If you want to assign a subaddress
to your fax machine, contact your
service representative.
A
Set your original and select any
scan settings you require.
B
Select either G4 or G3 (ISDN).
C
Dial the fax number with the
number keys.
D
Press the User Function key
({ { { { F1} } } } -{ { { { F5} } } } ) where the subaddress
function has been registered.
nicating File File
Start TEL
TX File
Manual RX Status Mode
F1 F2 F3
01 02 03
"/" will appear on the display.
E
Enter the destination subaddress
with the number keys.
F
Press the { { { { Start} } } } key.
DIALING
De
Su
F4 F5
04 05 06
ND2L04E3
45
2