Setting Up The Machine On A Network; Printer/Lan-Fax - Ricoh Network Guide Network Manual

Connecting and Setting Up

Setting Up the Machine on a Network

This section describes the network settings you can change with User Tools (Sys-
tem Settings). Make settings according to functions you want to use and the in-
terface to be connected.
Important
2
❒ These settings should be made by the systems administrator, or after consult-
ing with the systems administrator.
Reference
For details about settings, see p.37 "Interface Settings"
❖ Viewing the Information Displayed in the List
$ These items must be set to use the function. Be sure to set them before at-
tempting to use the corresponding function.
❍ These items must be set if required.

Printer/LAN-Fax

Interface
Ethernet
14
Interface Settings/
Network
See p.37 "Network".
Settings
IP Address
Gateway Address
DNS Configuration
DDNS Configuration
Domain Name
WINS Configuration
NW Frame Type
*2
LAN Type
Ethernet Speed
*3
Effective Protocol
SMB Computer Name
SMB Work Group
Permit SNMP V3 Communication
Permit SSL / TLS Communication
Host Name
Machine Name
$
❍
❍
❍
❍
❍
❍
$
❍
$
❍
❍
❍
❍
❍
❍