Setting Up A Network-Connected Machine; Configuring Network Parameters On The Control Panel - Ricoh AC205 User Manual

A.4 U Y M
SING OUR
9
In the Enter a port name field, enter the shared name.
10
Click OK and click Close.
11
For Windows NT 4.0, click OK.
For Windows 2000/XP, click Apply and click OK.
Setting Up a Network-Connected
Machine
You have to set up the network protocols on the machine to use
it as your network printer.
You can configure the basic network parameters through the
machine's control panel. Use the machine's control panel to do
the following:
• Print a Network Configuration Page
• Configure TCP/IP
Configuring Network Parameters on the
Control Panel
Supported Operating Systems
N
:
OTES
• The operating systems supported by the network card may be
different from the operating systems supported by the machine.
The following table shows the network environments supported
by the machine.
• Printer driver does not support Windows 95.
Item
Network Interface
Network Operating
System
Network Protocols
Dynamic Addressing
Server
• TCP/IP: Transmission Control Protocol/Internet Protocol
N
ACHINE ON A ETWORK
Requirements
10/100 Base-TX
Windows 98/Me/NT 4.0/2000/XP
TCP/IP on Windows
DHCP, BOOTP