Ricoh Network Guide Network Manual page 138

Monitoring and Configuring the Printer
Message
snmpd start.
started.
Started.
Terminated.
Terminated. (PS not found)
The print server received error <error
number> during attempt to log in to the net-
work. Access to the network was denied. Ver-
ify that the print server name and password
are correct.
4
WINS name refresh :Server No Response
WINS name registration/refresh error
code(errornumber)
WINS name registration:Server No Response
WINS server address0.0.0.0
WINS Server=<WINS server address> NetBI-
OS Name=<NetBIOS name>
WINS wrong scopeID
Note
❒ For details about UNIX commands and parameters, see UNIX Supplement.
❒ For details about "syslog" command, see p.106 "syslog".
132
Problem and solutions
The snmpd service has started.
The direct print service has started.
The rendezvous function is enabled.
The rendezvous function is disabled.
The rendezvous function is disabled because
PS is not found.
Login to the file server failed. The print server
is not registered or a password is specified.
Register the print server without specifying a
password.
There was no response to the update request
from the print server. Check that the WINS
server address is correct and the WINS server
is working properly.
Set unique NetBIOS names.
Check that the WINS server address is correct
and the WINS server is working properly.
There was no response to the registration re-
quest from the server. Check that the WINS
server address is correct and the WINS server
is working properly.
The WINS server was not specified. Specify
the WINS server address to match the printer
name with WINS.
The printer name was successfully registered.
The scope ID is incorrect.
Specify the correct scope ID.