Ricoh Network Guide Network Manual page 134

Monitoring and Configuring the Printer
Message
child process exec error! (process name)
Connected DHCP Server(<DHCP server ad-
dress>).
connection from <IP address>
Could not attach to FileServer<error number> (In the remote printer mode) Connection to the
Could not attach to PServer<print server>
4
Current Interface Speed:xxxMbps
Current IP address <current IP address>
Current IPX address<IPX address>
DHCP lease time expired.
DHCP server not found.
dhcpcd start.
Duplicate IP=<IP address>(from <MAC ad-
dress>).
Established SPX Connection with PServ-
er,(RPSocket=<socket number>, con-
nID=<connection ID>)
exiting
Exit pserver
Frametype =<frame type name>
httpd start.
inetd start.
IPP cancel-job: permission denied.
ipp disable.
128
Problem and solutions
The network service failed to start. Turn the
printer off and then on. If this does not work,
contact your service or sales representative.
The IP address was successfully received from
the DHCP server.
Login was from the host IP address.
file server has not been established. The file
server has refused the connection. Check the
file server configuration.
(In the remote printer mode) Connection to the
print server has not been established. The
print server has refused the connection. Check
the print server configuration.
Speed of the network (10 Mbps or 100 Mbps)
The IP address <current IP address> was re-
ceived from the dhcp server.
Current ipx address
DHCP lease time has expired. The printer tries
to discover the DHCP server again. The IP ad-
dress until now becomes invalid.
The DHCP server was not found. Make sure
that the DHCP is on the network.
The DHCPCD service (dhcp client service) has
started.
The same IP address is used. Each IP address
must be unique. Check the address of the de-
vice indicated in [MAC address].
(In the remote printer mode) Connection to the
print server has been established.
The lpd service has ended and the system is
exiting the process.
(In the print server mode) The print server
function is disabled because the necessary
print server settings have not been made.
The frame type name is configured to be used
on NetWare.
The httpd service has started.
The inetd service has started.
The printer could not authenticate the name of
the user attempting to cancel a job.
Printing with ipp is disabled.