Ricoh Network Guide Network Manual page 119

Ricoh owner's manual network guide
Table of Contents

Advertisement

Messages
Cover Open: Lower Right
Cover Open: Mailbox
Cover Open: Right
Cover Open: Shift Tray Cover
Cover Open: Upper Left
Cover Open: Upper Right
Cover Open: Z-folding Upper
Data Size Error
Empty: Black Toner
Empty: Cyan Toner
Empty: Magenta Toner
Empty: Toner
Empty: Yellow Toner
Energy Saver Mode
Error
Error: Address Book
Error: Command Transmission
Error: DIMM Value
Error: Ethernet Board
Error: HDD Board
Error: IEEE1394 Board
Error: Media Link Board
Error: Memory Switch
Error: Optional Font
Error: Optional RAM
Error: Parallel I/F Board
Error: PDL
Error: USB Interface
Error: Wireless Card
Error: Wireless Card or Board
Exceed Booklet Stapling Limit
Full: Copy Tray
Full: Finisher
Getting Printer Information over the Network
Description
The lower right cover is open.
The mailbox is open.
The right cover is open.
The shift tray cover is open.
The upper left cover is open.
The upper right cover is open.
The upper Z fold unit cover on is open.
The data size error occurred.
The black toner cartridge is almost empty.
The cyan toner cartridge is almost empty.
The magenta toner cartridge is almost empty.
The toner cartridge is almost empty.
The yellow toner cartridge is almost empty.
The machine is in Energy Saver Mode.
An error has occurred.
An error has occurred in the data of the address book.
An error has occurred in the machine.
A memory error occurred.
An Ethernet board error has occurred.
A hard disk drive board error has occurred.
An IEEE 1394 interface board error has occurred.
An error has occurred on the media link board.
A memory switch error has occurred.
An error has occurred in the font file of the machine.
An error has occurred in the optional memory unit.
An error has occurred in the parallel interface.
An error has occurred in the page description language.
An error has occurred in the USB interface.
Wireless card is not inserted during start up, or the IEEE
802.11b interface unit or the wireless card is taken out after
start up .
An error has occurred in the IEEE 802.11b interface unit.
The printing has exceeded the stapling limit of the booklet
finisher.
The output paper tray is full.
Finisher tray is full.
4
113

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents