Ricoh Network Guide Network Manual page 153

*1
The optional IEEE 1394 interface board supports only TCP/IP.
*2
Use the SmartDeviceMonitor for Client port.
*3
To use IPP under Windows XP, Windows Server 2003, use the Standard IPP port.
Note, in SmartDeviceMonitor for Client however, this port does not support digest
access authentication.
*4
This can be used when the PostScript 3 module is installed.
*5
Under Windows, this function can be used with TCP/IP and NetBEUI.
*6
SMB using NetBEUI is unavailable.
Specifications
6
147