Accessing User Tools; Changing Default Settings - Ricoh Aficio IS 2315 Operating Instructions Manual

User Tools

Accessing User Tools

This section is for key operators in
charge of this machine.
User Tools allow you to change or set
defaults.
Note
❒ Operations for system settings dif-
fer from normal operations. Al-
ways quit User Tools when you
have finished. See p.37 "Quitting
User Tools".
4
❒ Selected settings are highlighted.
❒ Any changes you make with User
Tools remain in effect even if the
main power switch or operation
switch is turned off, or the {Clear
Modes} key is pressed.

Changing Default Settings

Note
❒ If a key operator code is already
set, the key operator code entry
display appears. Enter the key op-
erator code, and then press the
{OK} key. See p.40 "Key Operator
Code".
A
Press the {User Tools/Counter} key.
ABC DEF
JKL MNO
TUV WXYZ
36
User Tools/Counter ClearModes
Clear/Stop
Start
B
Select [System Settings] or [Copier
Features] using {U} or {T}, and
then press the {OK} key.
C
Select the menu using {U} or {T},
and then press the {OK} key.
Reference
p.33 "User Tools Menu ( System
Settings )"p.35 "User Tools
Menu ( Copier Settings )".
D
Select the item using {U} or {T },
and then press the {OK} key.
E
Change settings by following in-
structions on the display, and
then press the {OK} key.
Note
❒ To cancel changes made to set-
tings and return to the initial
d i s p l a y , p r e s s t h e { U s e r
Tools/Counter} key.
APE044S