Siemens SIMATIC S5 Manual page 193

Information
Description of the output fields
After starting the information function, INFORMATION and either MACHINING PROGRAM or MA-
CHI NE DATA is entered in the header. The source of the data is displayed in the DEVICE output
field, The BLOCK output field remains unchanged.
Description of the input fields
Data block:
Using <F7> (HELP), you can select between information about machine data or informa-
tion about machining programs.
Significance of the function keys
With these function keys you select the devices (1 P247, FD or PG) from which the data
blocks are to be read. If there are more than 48 entries <Fl > and <F2> are as-
signed the paging function.
<F4>: This starts the printout of the data blocks.
<F7>: With the HELP key you select the type of data block (machine data or machining pro-
grams).
With the EXIT key you can exit the information function.
5 - 5 6