Stopping Treatment; Changing The Settings On Your S8 Ii Device; The Standard Menu - ResMed ELITE S8 User Manual

Stopping Treatment

To stop treatment at any time, remove your mask and press
If your clinician has enabled SmartStart, simply remove your mask and treatment will
end.

Changing the Settings on your S8 II Device

You can change settings (such as Ramp Time, EPR Level) on the S8 II by using the
keypad and LCD. When the device is in standby mode you can display a series of
screens (a menu) on the LCD screen in order to view and change the settings for a
particular function.

The Standard Menu

Your clinician will have enabled the menu on your S8 Series II device. The picture
shows the standard menu in each mode.
CPAP
WELCOME
S8 CLASSIC
>>>>>>
S8 CLASSIC RAMP: 10min
menu
EPR LEVEL: 1
change
USAGE: 1000/1068
MASK: ULTRA
change
SW: SX4800100
* Only displayed if access set by clinician.
Note: The AutoSet menu is available on the S8 AutoSet II only.
To enter the standard menu from the standby (RAMP or SETTLING) screen, press
.
*
exit
exit
exit
exit
exit
AUTOSET
WELCOME
S8 CLASSIC
>>>>>>
S8 CLASSIC SETTLING: 10min
menu
EPR LEVEL: 1
*
change exit
exit
USAGE: 1000/1068
exit
MASK: ULTRA
change exit
SW: SX4800100
exit
Changing the Settings on your S8 II Device
.
5