ResMed S8 Escape User Manual
  1. Manuals
  2. Brands
  3. ResMed Manuals
  4. Medical Equipment
  5. S8 ESCAPE System
  6. User manual

ResMed S8 Escape User Manual

Resmed s8 escape system - flow generator user's manual
Hide thumbs Also See for S8 Escape:
Table of Contents

Advertisement

Quick Links

See also: User Manual
S8 Escape
System
™
USER'S MANUAL
English
338215-Eng/3 05 08
1

Advertisement

Table of Contents
loading

Related Manuals for ResMed S8 Escape

Summary of Contents for ResMed S8 Escape

  • Page 1 S8 Escape System ™ USER’S MANUAL English 338215-Eng/3 05 08...
  • Page 2 INTEGRATED HUMIDIFIER / HUMIDIFICATEUR INTÉGRÉ/ SETTING UP THE S8 ™ / INSTALLATION DE LA S8 / INSTALACIÓN DEL S8 HUMIDIFICADOR INTEGRADO / HUMIDIFICADOR INTEGRADO / MONTAGEM DO S8 ™ S8 Escape Component of 338215/3 ILLUSTRATIONS Composant du 338215/3 ILLUSTRATIONS Componente de 338215/3...
  • Page 3 MÓDULO TARJETA DE DATOS / COMO USAR O CARTÃO DE DADOS USING A RESMED PASSOVER / UTILISATION D'UN PASSOVER RESMED / USO DE UN PASSOVER DE RESMED / UTILIZAÇÃO DE UM RESMED PASSOVER Note: Some products not available in all regions. / Remarque : certains produits ne sont pas disponibles dans tous les pays.

  • Page 4: Table Of Contents

    ONTENTS ..........5 NTRODUCTION ESPONSIBILITY .
  • Page 5 ........29 YSTEM PECIFICATIONS S8 E SCAPE CCESSORIES...

  • Page 6: Ntroduction

    NTRODUCTION Thank you for choosing the S8 E ™ flow generator. The S8 E is a compact, SCAPE SCAPE all-in-one package with an inbuilt power supply and the option of integrated data management and humidification. This user manual contains the information you need for the correct use of your S8 E SCAPE ESPONSIBILITY...

  • Page 7: Contraindications

    (and connectors) recommended SCAPE • by ResMed, or by a physician or respiratory therapist. A mask should not be used unless the S8 E device is turned on and operating properly. The vent hole or SCAPE holes associated with the mask should never be blocked.

  • Page 8: Cautions

    Caution should be exercised if the room temperature is warmer than 90 F (32 When AC mains power (100–240V AC) is not available, always use a ResMed • DC-12 converter. (The DC-12 converter is available as an optional accessory. It is not supplied with all models.)

  • Page 9: Adverse Effects

    DVERSE FFECTS Patients should report unusual chest pain, severe headache, or increased breathlessness to their prescribing physician. An acute upper respiratory tract infection may require temporary discontinuation of treatment. The following side effects may arise during the course of therapy with the CPAP device: drying of the nose, mouth, or throat •...

  • Page 10: He S8 Escape Ystem

    SCAPE and ResMed P ™ humidifiers. ASSOVER UMID ASKS You will also need a ResMed mask system (supplied separately). The ResMed mask systems that are recommended for use with the S8 E are: SCAPE ASAL ASKS ODULAR ASAL •...

  • Page 11: Humidifiers

    LTRA IRAGE • WARNING Only ResMed mask systems are compatible for use with the S8 Escape. Please refer to “Warnings” on page 6. UMIDIFIERS A humidifier may be required if you are experiencing dryness of the nose, throat, or mouth. The...

  • Page 12: How To Use The S8 Escape

    Note: You can also place your S8 Escape on the floor beside or underneath your bed. Ensure that the area is free from dust and clear of bedding, clothes, or any other objects that could block the air inlet.

  • Page 13: Stop Treatment

    Fit your mask as described in the mask user instructions. WARNING A mask should not be used unless the S8 Escape device is turned on and operating properly. When ramping begins the LCD will display the word "RAMPING", with the current pressure indicated as dashes.

  • Page 14: How To Attach A Humidifier

    Make sure the water chamber of the HumidAire 3i is empty before you attach or detach the humidifier. b. Remove the connector plug on the S8 Escape (see section A of the illustration sheet) before you attach the HumidAire 3i. Reattach the connector plug firmly after you detach the HumidAire 3i.

  • Page 15: Attach A Res Med Passover Humidifier

    SCAPE end into a power outlet. Please refer to the ResMed Passover User’s Manual for further details. WARNING Make sure that the power cord and plug are in good condition and the equipment is not damaged.

  • Page 16: How To Use The Keypad

    OW TO USE THE EYPAD The control panel of the S8 E includes an LCD screen and keypad for navigating SCAPE through the menus and delivering treatment. LCD screen Up key Right key Left key Down key Start/Stop key LCD S CREEN The LCD screen displays the menus and treatment screens.

  • Page 17: How To Change The Settings On Your S8 Escape

    S8 E is in standby mode you can display a series of SCAPE screens (a menu) on the LCD screen in order to view and change the settings for a particular function. S8 ESCAPE PATIENT MENU S8 CLASSIC S8 CLASSIC RAMP...
  • Page 18 OW TO EXIT OUT OF A MENU Press the Right key (Exit). This will take you back to the Patient Menu screen. OW TO EXIT OUT OF AN ITEM WITHIN THE MENU Press the Right key (Exit). OW TO HANGE THE During ramp time, the pressure increases from a low pressure to the prescribed treatment pressure.
  • Page 19 S8 E ESSAGES ON THE SCAPE S8 E Your clinician may have set your to remind you about important events, SCAPE such as when to replace your mask, when to insert your Data Card (if your device is Data Card enabled) and so on. The reminder message is displayed on the LCD and is visible if the device is not delivering therapy.

  • Page 20: S8 Modules

    S8 M ODULES Note: Do not remove modules while power is connected to the S8 Escape. Your S8 E will have one of two modules fitted to the back: a blank module or a SCAPE ™ Data Card module. SING A...
  • Page 21 NSERT THE Switch on the S8 E and wait until you see the standby (Ramp) screen. SCAPE • Hold the Data Card with the arrow facing up and insert it into the slot in the Data • Card module (H-1). Push the card in smoothly until it stops moving (H-2) and messages start •...
  • Page 22 WARNING If your clinician has told you to use this Data Card to update the settings on your device and the “Settings Success” message does not appear, contact your clinician immediately. S8 M ODULES...

  • Page 23: Cleaning And Maintenance

    LEANING AND AINTENANCE You should regularly carry out the cleaning and maintenance described in this section. Refer to your mask manual for detailed instructions. AILY LEANING Mask Clean the mask according to the instructions supplied with the mask. Air tubing Disconnect the air tubing from the S8 E (and humidifier, if used) and hang the...

  • Page 24: Replacing The Air Filter

    Ensure the air filter and air filter cover are fitted at all times. ERVICING CAUTION Do not attempt to open the S8 Escape case. There are no user serviceable • parts inside. Inspection and repair should only be performed by an authorized agent. Under •...
  • Page 25 REQUENTLY SKED UESTIONS S8 E OW WILL IT FEEL WHEN AM BREATHING WITH THE SCAPE When you first use your S8 E , you may feel uncomfortable breathing against the SCAPE airflow. This is normal. You will continue to breathe normally while you sleep. Take time to adjust to this new sensation.

  • Page 26: Frequently Asked Questions

    S8 E complies with US FCC Part 15, Class B SCAPE SCAPE requirements. Note: Do not use your S8 Escape while the aircraft is taking off or landing. S8 E (AC) USE MY SCAPE IF MAINS POWER IS NOT AVAILABLE...

  • Page 27: Troubleshooting

    ROUBLESHOOTING If there is a problem, try the following suggestions. If the problem cannot be solved, contact your equipment supplier or ResMed. Do not attempt to open the device. Problem Possible Cause Solution No display. Power not connected. Ensure the appropriate power...
  • Page 28 You may have removed the Data Reinsert the Data Card and wait Card before settings were copied for the Settings Success to the S8 Escape. Remove Card message to appear on the LCD. The card is not a ResScan Data Only use a ResScan Data Card.
  • Page 29 Problem Possible Cause Solution The following message There is a data error on the Data Contact your clinician is displayed on the Card. immediately. LCD after you try to update the settings using the Data Card: Settings Error Remove Card The following message The settings were not updated.
  • Page 30 • 2.5A < 140VA (110W) (maximum power consumption). Instantaneous peak power consumption <340 VA. Refer to the DC-12 converter instructions for DC ratings. Only use the ResMed • DC-12 converter for DC input. Actual power consumption will vary, depending on factors such as the use of accessories, height above sea level, and ambient temperature.
  • Page 31 ODULE Dimensions (H x W x D): 1.95” x 1.66” x 0.47” (49.7 mm x 42.2 mm x 12 mm) EVICES WHERE APPLICABLE Housing Construction: Flame retardant engineering thermoplastic Environmental Conditions Operating Temperature: +41°F to +104°F (+5°C to +40°C) Operating Humidity: 10%–95% non-condensing Storage and Transport Temperature: -4°F to +140°F (-20°C to +60°C) Storage and Transport Humidity: 10%–95% non-condensing Operating Altitude: sea level to 8500’...
  • Page 32 ’ UIDANCE AND ANUFACTURER ECLARATION LECTROMAGNETIC MISSIONS AND MMUNITY Guidance and manufacturer’s declaration—electromagnetic emissions The S8 series of devices is intended for use in the electromagnetic environment specified below. The customer or the user of the S8 device should assure that the device is used in such an environment. Electromagnetic environment—...
  • Page 33 Guidance and manufacturer’s declaration—electromagnetic immunity The S8 series of devices is intended for use in the electromagnetic environment specified below. The customer or the user of the S8 device should assure that the device is used in such an environment. IEC60601-1-2 Electromagnetic Immunity test...
  • Page 34 Guidance and manufacturer’s declaration—electromagnetic immunity The S8 series of devices is intended for use in the electromagnetic environment specified below. The customer or the user of the S8 device should assure that the device is used in such an environment. IEC60601-1-2 Compliance Immunity test...
  • Page 35 Recommended separation distances between portable and mobile RF communications equipment and the S8 series of devices The S8 series of devices is intended for use in an environment in which radiated RF disturbances are controlled. The customer or the user of the S8 device can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the S8 device as recommended below, according to the maximum output power of the communications equipment.
  • Page 36 Excludes single-use devices. Note: Some models are not available in all regions. If the product fails under conditions of normal use, ResMed will repair or replace, at its option, the defective product or any of its components. This Limited Warranty does...
  • Page 38 NDEX HumidAire attaching 13 accessories 10 HumidAire 3i air filter 9 attaching 13 replacing 23 storage 9 air pressure 26 humidifier 24 air tubing 9 cleaning 22 cleaning 22 humidifiers 10 connect to air outlet 11 kinked 26 positioning 12 aircraft 25 international use 24 airflow...
  • Page 39 25 power supply 29 ramp time 12 reminder replace mask 18 reminders 18 ResScan Data Card module 10 right key 15 S8 Escape dimensions 29 servicing 23 settings 16 set-up 11 start treatment 12 stop treatment 12 travelling with 24...

Table of Contents