Technical Specifications - ResMed ELITE S8 User Manual

Technical Specifications

Operating pressure range
Dimensions (H x W x D)
Weight
Operating Temperature
Power Supply
Operating Humidity
Storage and Transport
Temperature
Storage and Transport
Humidity
Operating Altitude
Electromagnetic
Compatibility
Air Filter
Air Tubing
Air Outlet
IEC 60601-1 Classifications
Supplemental Oxygen
Housing Construction
Noise Level
The manufacturer reserves the right to change these specifications without notice.
Symbols which appear on the device
Attention, consult accompanying documents;
Dangerous voltage;
4 to 20 cm H O
2
4.6" x 6.5" x 5.7" (112 mm x 164 mm x 145 mm)
3.1 lb (1.4 kg)
+41°F to +95°F (+5°C to +36°C)
• Input range for S8 Series II with HumidAire 3i: 100–240V, 50/60Hz;
110V, 400Hz; 2.5A <140VA (110W) (maximum power consumption).
Instantaneous peak power consumption <340VA.
• Refer to the DC-12 converter instructions for DC ratings. Only use
the ResMed DC-12 converter for DC input.
• Typical power consumption at 20 cm H
10%–95% non-condensing
-5°F to -140°F (-20°C to +60°C)
10%–95% non-condensing
Sea level to 8500' (2591 m)
Product complies with all applicable electromagnetic compatibility
requirements (EMC) according to IEC60601-1-2, for residential,
commercial and light industry environments. The electromagnetic
compatibility tables for these ResMed devices can be found on
www.resmed.com, on the Products page under Service and
Support. Click on the PDF file for your device.
Two-layered, powder-bonded, polyester non-woven fibre
Flexible plastic, 6' 6" (2 m)
The 22 mm conical air outlet complies with EN 1281-1
Class II (double insulation), Type CF
Recommended maximum supplemental oxygen flow: 4 L/min
Flame retardant engineering thermoplastic
Radiated sound pressure is measured at <24±2 dBA at 10 cm H
3'3.36" (1 m)
according to ISO17510-1
Class II equipment;
O is 39VA or 20.7W.
2
Drip proof; Type CF equipment;
Start/Stop.
O and
2
Troubleshooting 15