Table of Contents
Advertisement
S8 Series II
S8 Escape™ II Auto
POSITIVE AIRWAY PRESSURE DEVICE
User Guide
English
ResMed Ltd (Manufacturer) 1 Elizabeth Macarthur Drive Bella Vista NSW 2153 Australia
ResMed Corp (US Designated Agent) 14040 Danielson Street Poway CA 92064-6857 USA
ResMed (UK) Ltd (EU Authorized Representative) 96 Milton Park Abingdon Oxfordshire OX14 4RY UK
ResMed Offices Australia, Austria, Belgium, Brazil, China, Finland, France, Germany, Greece, Hong Kong, India, Ireland, Italy, Japan, Malaysia,
Mexico, Netherlands, New Zealand, Norway, Portugal, Singapore, South Africa, Spain, Sweden, Switzerland, UK, USA (see www.resmed.com for
contact details).
Protected by patents: US 5199424, US 5522382, US 6705315. Other patents pending.
Protected by design registrations: AU 302180, AU 302181, AU 302182, AU 302183, AU 302184, AU 302185, AU 302186, CN 200430121212.2, CN
200430121213.7, CN 200430121211.8, CN 200430121214.1, CN 200430121215.6, CN 200430121216.0, CN 200430121217.5, EP 269436, HK
0412901.9, JP 1257662, JP 1257663, JP 1266956, JP 1266957, JP 1267270, JP 1267271, NZ 405614, NZ 406923, NZ 406924, NZ 406925, NZ
406926, NZ 406927, NZ 406928, US D544598, US D553228, US D557406, US D557407, US D560795, US D561891, US D565160. Others pending.
S8, S8 Escape, H4i, ResScan, ResControl, ResLink and ResTraxx are trademarks of ResMed Ltd and Escape and HumidAire are registered in U.S.
Patent and Trademark Office.
© 2008 ResMed Ltd.
338562-Eng/1 08 08
Advertisement
Table of Contents
Related Manuals for ResMed S8 Escape II Auto
Summary of Contents for ResMed S8 Escape II Auto
- Page 1 406926, NZ 406927, NZ 406928, US D544598, US D553228, US D557406, US D557407, US D560795, US D561891, US D565160. Others pending. S8, S8 Escape, H4i, ResScan, ResControl, ResLink and ResTraxx are trademarks of ResMed Ltd and Escape and HumidAire are registered in U.S.
-
Page 2: Table Of Contents
Start Treatment Stop Treatment How to Change the Settings on your S8 Escape II Auto Using the Data Card to Collect data ......7 Cleaning and Maintenance . -
Page 3: Introduction
Introduction The S8 Escape II Auto self-adjusting sleep apnea system is indicated for the treatment of obstructive sleep apnea (OSA) in adult patients. The S8 Escape II Auto self-adjusting sleep apnea system has two treatment modes: auto-titrating APAP and fixed-pressure CPAP. The S8 Escape II Auto system is intended for home and hospital use. -
Page 4: Parts Of The S8 Escape Ii Auto System
Products page under Service & Support. ResScan Data Card The ResScan Data Card may be used with the S8 Escape II Auto either to help your clinician monitor your treatment or provide you with updates to your device... -
Page 5: Using The S8 Escape Ii Auto
Make sure the power cord and plug or adapter cable are in good • condition and the equipment is not damaged. Only ResMed air tubing should be used with the device. A different type • of air tubing may alter the pressure you actually receive, reducing the effectiveness of your treatment. -
Page 6: How To Use The Control Panel
LCD screen Keypad Start/Stop key The control panel of the S8 Escape II Auto includes an LCD screen which displays the menus and treatment screens as well as a keypad for navigating through the menus and delivering treatment. The S8 Escape II Auto keypad has the following keys: Function •... -
Page 7: Stop Treatment
To start treatment, press Fit your mask as described in the mask user instructions. WARNING A mask should not be used unless the S8 Escape II Auto is turned on and operating properly. Stop Treatment To stop treatment at any time, remove your mask and press... - Page 8 (Apply) to save the new language. Messages on the S8 Escape II Auto LCD Your clinician may have set your S8 Escape II Auto to remind you about important events, such as when to replace your mask, when to insert your Data Card (if your device is Data Card enabled) and so on.
-
Page 9: Using The Data Card To Collect Data
Using the Data Card to Collect data If your clinician needs to review your treatment, they will ask you to use the Data Card to copy data from your S8 Escape II Auto, and to return the card to them. Copying data onto the Data Card Switch on the S8 Escape II Auto and wait until you see the standby (RAMP/SETTLE) screen. -
Page 10: Cleaning And Maintenance
Note: This message only appears once. If you re-insert the Data Card after you have updated your settings, this message is not displayed. Remove the Data Card from the S8 Escape II Auto. Store the Data Card in its protective folder when not in use. -
Page 11: Replacing The Air Filter
Servicing This product (S8 Escape II Auto) should be inspected by an authorized ResMed Service Center five years from the date of manufacture. Prior to this, the device is intended to provide safe and reliable operation provided that it is operated and maintained in accordance with the instructions provided by ResMed. -
Page 12: Frequently Asked Questions
CAUTION Do not attempt to open the S8 Escape II Auto case. There are no user • serviceable parts inside. Inspection and repair should only be performed by an authorized agent. • Under no circumstances should you attempt to service or repair the S8 Escape II Auto yourself. -
Page 13: Troubleshooting
The device should not be connected to both AC and DC power sources simultaneously. Troubleshooting If there is a problem, try the following suggestions. If the problem cannot be solved, contact your equipment supplier or ResMed. Do not attempt to open the device. Problem/Possible Cause Solution No display Power is not connected. - Page 14 Problem/Possible Cause Solution Displays error message: (where defines an error) Exxxx Call Service xxxx MOTOR FAULT Call Service UPLOAD LANGUAGES Call Service DATA LOST Call Service Component failure. Call service. The following message is displayed on the LCD after you try to update settings or copy data to the Data Card: Card Error Remove Card Data Card is not inserted...
-
Page 15: Technical Specifications
Weight 2.9lb (1.3 kg) • Power Supply Input range for S8 Escape II Auto with H4i:100–240V, 50/60Hz; 110V, 400Hz; 2.5A < 140VA (110W) (maximum power consumption). Instantaneous peak power consumption <340VA. • Refer to the DC-12 converter instructions for DC ratings. Only use the ResMed DC-12 converter for DC input. -
Page 16: General Warnings And Cautions
The S8 Series II should be used with masks (and connectors)* recommended • by ResMed, or by a physician or respiratory therapist. A mask should not be used unless the S8 Series II is turned on and operating properly. The vent hole or holes associated with the mask should never be blocked. - Page 17 (6ºC) higher than the temperature of the room. Caution should be exercised if the room temperature is warmer than 90ºF (32ºC). When AC mains power (100–240V AC) is not available, always use a ResMed • DC-12 converter. (The DC-12 converter is available as an optional accessory. It is not supplied with all models.)
-
Page 18: Limited Warranty
ResMed shall not be responsible for any incidental or consequential damages claimed to have occurred as a result of the sale, installation or use of any ResMed product. Some regions or states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. - Page 19 Limited Warranty...