Color Balance - DataCard SD260 User Manual

Color Balance

1.
Evaluate the image for color balance. Does the card have a yellow cast or do photos have a
greenish tint?
If most of the card prints with the correct colors, consider using a graphics application to
change the logo or other part of the card that needs color improvement.
2.
Determine which color needs adjustment.
Click the Up arrow to increase a color, or
the Down arrow to decrease the color.
The Adjusted image shows the effect of

the new setting.
If changing the obvious color does not

produce the desired effect, try changing
the other two.
3.
Click Apply after each change to save it.
4.
To verify changes, do one of the following:
Print one or more cards from your card

production software.
Print a sample card from the Printer

Properties > Status page.
5.
Evaluate the appearance of the cards.
6.
Repeat these steps until the cards meet your requirements.
7.
Click Apply to save the new values.
H & T
INTS IPS
The settings on the Color Adjustment page affect the color printing of all cards sent from the

PC that uses the Card Printer Driver.
Text and images formatted as black (K) are not affected by color adjustment.

To return the Color Adjustment settings to their default values, click Restore Defaults.

XPS Card Printer Driver User's Guide 91