22.
Attach the front panel into the main body.
23.
Tighten the screws on the front panel with a Phillips screwdriver. (Two locations)
24.
Press the Down switch (
(
※When the battery cable connector is detached, the buzzer sounds, and "Fault-
E11" is displayed on the LCD screen. When this occurs after battery
replacement, it is not an error.
Connect the battery cable connector to the connector on the UPS side, and
the buzzer automatically stops sounding and "Fault-E11" is canceled.
BL50T/BL75T/BL100T
), select [Enabled], and press the Enter switch
).
4 Maintenance and inspection
4-2 Replacing the battery
4
57