Diagnostics And Tests - Agilent Technologies 1100 series Reference Manual

Tests screen
Leak Test
Control Module Screens for the Binary Pump

Diagnostics and Tests

Diagnostics and Tests
Use the Esc key to receive Views on the F5 key. Choose System from the
pull-down menu. Use the F3 key (Tests) to select the pump. Two tests are
available to test the Agilent 1100 pumps.
Press F1 (Leak Test) on the Test screen to perform a leak test. Several steps
like purging the system, setting up Isopropanol as solvent on the channel that
is supposed to be tested and blocking the purge valve outlet with a blank nut
have to be performed before operating the leak test. For details use the 'i'-key
to achieve conext sensitive help, follow the instructions on the screen and
refer to "Running the Leak Test" on page 94. For evaluating the leak test refer
to "Evaluating the Results" on page 96.
256