Black Glass Refractory Installation - Heat & Glo 6000CLX-IFT-S Installation Manual

F. Black Glass Refractory Installation
6000CLX-IFT-G ,6000CLX-IFTLP-G,
8000CLX-IFT-G, 8000CLX-IFTLP-G
1. Install rear glass panel in front of insulation board on
rear refractory bracket. Hold rear glass panel in place
and slide one side insulation board into position be-
tween side refractory bracket and side of firebox as
shown in Figure 1.
Figure 1. Install Rear Glass Panel
2. Install side glass panel in front of insulation board.
3. Install side refractory bracket between the insulation
board and the side of the firebox. Secure with screw
as shown in Figure 2.
4. Bend side refractory tab over glass panel. See Fig-
ure 2.
5. Install side insulation board on opposite side and re-
peat steps 2-4 for other side.
SCREW
TAB BENT OVER SIDE
GLASS PANEL
Figure 2. Install Side Glass Retention Bracket
Heat & Glo • 6000CLX-IFT, 8000CLX-IFT Installation Manual • 2506-980 Rev. B • 3/18
6. Install top refractory panel. Rest it on top of the side
glass panels and gently push to the rear. See Figure
3.
Figure 3. Install Top Refractory Panel
59