Code gear detection
Gear from gearpoti
Voltage gearpoti
Flag gear det. by poti
CWGANG
code for gear detection
by gear poti = 1 oder Button Gear poti must be flashed to reference page by using :
Action/ Flashing / Working Page to Reference Page
ugang_w
Voltage gear poti , set to 3.85 V in 6. Gear
CAL GEAR
calibrates gear potentiometer to 3.85 V
must be flashed to reference page by using:Action/Flashing/Working Page to Reference Page
do basic setting manually, calibration max. +-0.2 V
ZERO GEAR
reset offset ( ugang_off ) to 0
must be flashed to reference page by using:Action/Flashing/Working Page to Reference Page
UGANGP, UGANGPHP, UGANGCAL, UGANGMN, UGANGMX, D_UGANG -> nicht bearbeiten
Detected gear
Det. Gear from ratio
Offset gear poti callib .
corr. volt. gera poti
Threshold ratio1 - 2
Threshold ratio2 - 3
Threshold ratio3 - 4
Threshold ratio4 - 5
Threshold ratio5 - 6
70