Porsche 911 GT3 Cup 2008 Technical Handbook page 66

Upload PAR-File to MODAS:
Copy PAR-File to MODAS:
Copy PAR-File to A:
Open LOG-file:
Programme start:
Retrieves the current parameter files from the control unit.
Copies any *.par parameter file from disc to the Modas sub-directory
\Modas\Parameter\
Copies any *.par parameter file to disc.
Opens the protocol file MODAS.LOG
MODAS is started from the GT3 Toolbox.
MODAS makes a connection to the control unit through the KIC2-
Interface and checks the programme version in the control unit when
the programme is started. If different programme versions are
detected between the control unit and MODAS configuration, an error
dialogue box similar to the following picture appears:
If the system does not find the description file given in the MODAS
configuration drive, the user is requested to load the description file
belonging to the programme version in the control unit from the disk
drive.
If the description file belonging to the configuration file is not available
the following error dialogue box is displayed:
MODAS starts without a page view after the dialogue box has been
confirmed. Through the menu bar 'File -> load ASAP-File' a
description file can be chosen and loaded.
A connection to the control unit via the K-line is made if the programme
version in the control unit corresponds with the description file. The
start page appears on which the most important engine measured
variables are displayed. The KIC-button in the lower right-hand corner of
the screen changes from red to green. If the connection is recognised
as being broken, the button changes back to red after about 15
seconds.
61