Porsche 911 GT3 Cup 2008 Technical Handbook page 55

Brake balance display and brake force distribution
-7 -6
The brake force distribution is shown in the Motec – Display.
Display Setup "Practice"
The adjustment range is from - 7 to + 7
Attention:
Direction of rotation "-" balance to rear (- 7 = max rear pressure)
Direction of rotation "+" balance to front (+7 = max front pressure)
Basis setup +2 = front axle 40 bar rear axle 43 bar
Brake balance 911 GT3 Cup MY 2005 (997)
-5 -4 -3 -2
Brake balance turns
• The potentiometer is set initially to zero.
• Only remove the transport safety block and operate the
potentiometer when the complete assembly is fitted to car
and the shaft has been mounted to the balance bar. The
balance bar MUST be set in the middle position before fitting
the potentiometer.
• The display values must not exceed +7 or -7 when rotating
the balance bar (the potentiometer will be severely damaged
if rotated beyond these values).
• Potentiometers removed from the car should be set to zero
with the MoTeC System before being refitted.
80
70
60
50
40
30
20
10
0
-1 0 1 2
50
3 4 5 6
VA Bremsdruck
HA Bremsdruck
7