Porsche 911 GT3 Cup 2008 Technical Handbook page 17

Re-setting the throttle
idle adjusting srew
Re-setting the throttle is always necessary if the ECU or the throttle
sensor were changed or replaced.
Disconnect throttle cable
•
Rotate the knurled screw (idle adjustment screw) anti-clockwise
•
till a gap is visible between the cam-disc and the idle adjustment
screw (throttle completely closed).
• select warm up mode in Motec display
• press both menu button for 3 sec
• the Display show you "RESET" and 0,0
• Open throttle 6,5% with the idle adjustement screw (refer to
Motec display).
• Lock idle adjustment screw
• Connect throttle cable
• heck full throttle (refer to Motec display 100%
12
press both menu
button for 3 sec.
the Display show you
"RESET" and 0,0