Fit the complete mounting plate to the differential housing and
tighten (7x M8 cap head screws). Lightly coat the threads with
Loctite 243.
Attention: The gearbox must be positioned vertically
before fitting the mounting plate.
st
Rotate the selector barrel to the 1
gear position.
rd
Slide the oil pump drive, spacer, 3
gear, bearing hub, needle
nd
roller bearing and 2
gear to the shaft.
Mount the reverse gear gear-shift rod.
st
nd
Slide on the dog-ring, 1
/ 2
selector fork and selector rod.
23