Engine Cooling; Induction System - Porsche 911 GT3 Cup 2008 Technical Handbook

Engine cooling:

Induction system:

Air filter element:
The engine cooling is made by a water/oil heat-exchanger fitted to the
water cooling system.
Multi-stage – resonance – induction channel
Central air intake plenum
Replaceable air filter in boot lid
Attention:
The rubber sleeve in the connecting part must be removed when
racing in the rain.
Attention:
Do not clean the air filter element with high-pressure.
Carefully remove the air filter element
Place the filter in a suitable water filled container.
Allow the filter to dry (without air pressure or hot air gun)
Afterwards impregnate the filter with filter oil spray.
10