Clearances - Regency Bellavista B36X Owners & Installation Manual

The clearances listed below are Minimum distances unless otherwise stated:
A major cause of chimney related fi res is failure to maintain required clearances (air space) to combustible materials. It is of the greatest
importance that this fi replace and vent system be installed only in accordance with these instructions.
Caution Requirements
The top, back and sides of the fi replace are defi ned by
standoffs. The metal ends of the standoff may NOT be
recessed into combustible construction.
B36X Clearance Requirements
Clearance:
A: Mantel Height (min.)
B: Sidewall
C: Ceiling
D: Mantel Depth
E: Alcove Width
F: Alcove Depth
Notes:
Regency Bellavista™ B36X Gas Fireplace

CLEARANCES

Dimension
6-1/2" (165mm) Top of Fireplace Opening
12" (304mm) on one side Side of Fireplace Opening
36-34" (933mm) Top of Fireplace Opening
12" (304mm) 14-1/2 " (368mm) from
Top of Fireplace Opening
84" (2134mm) Sidewall to Sidewall (Minimum)
36" (914mm) Front to Back Wall (Maximum)
0" No Hearth Required
Fire hazard is an extreme risk
if these clearances (air space) to combustible materials are not
adhered to. It is of greatest importance that this fi replace and vent
system be installed only in accordance with these instructions.
Measured From:
INSTALLATION
WARNING
Minimum Vent Clearances
to Combustibles
Horizontal Top 2" (51mm)
Horizontal Side 1-1/2 " (38mm)
Horizontal Bottom 1-1/2" (38mm)
Vertical Vent 1-1/2" (38mm)
9