Regency Bellavista B36X Owners & Installation Manual page 44

INSTALLATION
4) Remove 1 screw (see inset A), position right side panel in fi rebox -
position panel clip in place and secure with 1 screw (see inset B).
Tighten the screw.
4"
22"
5) Repeat step 4 for left side panel.
6) Reverse step 1.
Final Installation
BLACK ENAMEL PANEL INSTALLATION
TOP
BACK
RIGHT
1) Remove the heat defl ector by removing the 2 screws securing the
heat defl ector to the top of the fi rebox (see Diagram 2).
Heat defl ector
44
Location of hex
head screw
A
B
Diagram 6
Diagram 7
LEFT
Diagram 1
Diagram 2
2) Install the back panel fi rst - use care when clearing the burner assembly
and rear log tray, so panel is not scratched.
3) Install the top panel next - slide the panel in over top of the back panel
- orient the panel so the fold in the metal faces in (see inset A).
Diagram 4
4) Remove 1 screw (see inset A), position right side panel in fi rebox -
position panel clip in place and secure with 1 screw (see inset B).
Tighten the screw.
Diagram 5
5) Repeat step 4 for left side panel.
6) Reverse step 1.
Final Installation
Regency Bellavista™ B36X Gas Fireplace
Diagram 3
Fold
A
A
B
Diagram 6