Top Flue Collar Installation - Regency Bellavista B36X Owners & Installation Manual

INSTALLATION
The unit comes equipped as a rear vent unit. These instructions are to be used, only if the unit is going to be top vented.
Top Collar Assembly Kit
1 Intake Collar Assembly with Gasket
1 Intake Collar Plate with Gasket
1 Top/Rear Exhaust Assembly with Gasket
1 Heat Defl ector
1 Baffl e Plate
29 1/4" x 1/2" Screws (4 spares)
1 Restrictor
1 Intake Collar Gasket (spare)
1 Exhaust Assembly Gasket (spare)
1. Remove the door assembly by releasing the adjustable latches and lifting up off the door frame assembly.
2) From inside the fi rebox, remove the top heat defl ector by removing
2 - 1/4" x 1/2" screws.
Heat Defl ector
3) From inside the fi rebox, remove the baffl e plate by removing 4 - 1/4"
x 1/2 " screws. See Diagram 3
Baffl e Plate
14
UNIT ASSEMBLY PRIOR TO INSTALLATION

TOP FLUE COLLAR INSTALLATION

Note: This conversion must be done prior to the unit being placed in position.
Adjustable Tension
Diagram 2
Diagram 3
Exhaust Assembly
w/ gasket
Latch location
4) From the inside of the fi rebox, remove the exhaust assembly by
removing the 8 - 1/4" x 1/2" screws. See Diagram 4.
Intake Collar Plate
Intake Collar Assembly
w/gasket
w/gasket
Diagram 1
Diagram 4
Regency Bellavista™ B36X Gas Fireplace