Dc Sparker Installation - Regency Bellavista B36X Owners & Installation Manual

Installation of the DC Sparker:
23) Locate the Piezo Ignitor situated at the right side of the
valve assembly.
24) Remove the Piezo Ignitor wire from the back of the Piezo Ignitor.
Ignitor
Wire
Piezo
Ignitor
25) Connect the ignitor wire from the Piezo to the DC sparker.
DC
Sparker
Ignitor
Wire
26) Connect the DC spark generator wires to the SIT Valve.
Secure with a phillips head screw as shown below.
Regency Bellavista™ B36X Gas Fireplace

DC SPARKER INSTALLATION

27) Plug the DC spark generator wires to the DC Sparker.
Piezo
Ignitor
28) Remove the battery cover from the DC Sparker and install 1 -
1)
2)
DC Sparker
Generator Wires
'AA' battery in the DC Sparker and then install the DC Sparker to
the fl oor of the unit, left of the valve assembly, with two Phillips
screws.
DC Sparker Battery Replacement
Remove the battery cover from the DC Sparker - remove the AA
battery.
Replace with a new 'AA' battery and reinstall battery cover.
INSTALLATION
41