Cisco CRS Series Configuration Manual page 88

Configuring MVPN GRE BIDIR
Command or Action
Step 14
address-family {ipv4 | ipv6} unicast
Example:
RP/0/RP0/CPU0:router(config-bgp)# address-family
ipv4 unicast
Step 15
redistribute connected
Example:
RP/0/RP0/CPU0:router(config-bgp-af)# redistribute
connected
Step 16 address-family {ipv4 | ipv6} multicast
Example:
RP/0/RP0/CPU0:router(config-bgp)# address-family
ipv4 multicast
Step 17 redistribute connected
Example:
RP/0/RP0/CPU0:router(config-bgp-af)# redistribute
connected
Step 18 address-family {vpnv4 | vpnv6} unicast
Example:
RP/0/RP0/CPU0:router(config-bgp)# address-family
vpnv4 unicast
Step 19
address-family {ipv4 | ipv6} mdt
Example:
RP/0/RP0/CPU0:router(config-bgp)# address-family
ipv4 mdt
Step 20
address-family {ipv4 | ipv6} mvpn
Example:
RP/0/RP0/CPU0:router(config-bgp)# address-family
ipv4 mvpn
Cisco IOS XR Multicast Configuration Guide for the Cisco CRS Router, Release 5.2.x
78
Implementing Multicast Routing on Cisco IOS XR Software
Purpose
Configures ipv4 address-family for unicast and enters
the address family command mode.
Redistributes information from another routing
protocol through connected routes.
Configures ipv4 address-family for multicast and
enters the address family command mode.
Redistributes information from another routing
protocol through connected routes.
Configures vpnv4 address-family for unicast and
enters the address family command mode.
Configures ipv4 address-family for mdt and enters
the address family command mode.
Configures ipv4 address-family for mvpn and enters
the address family command mode.